• 600WRMS x 1 @ 4ohm/2ohm (CEA-2006)
• Marine Coating System
• Salt/Fog (ASTM B117) Certified
• UV (ASTM G154/D4329) Certified
• Mono Subwoofer Amp
• Low-Pass Crossover 50Hz-200Hz variable
• Subsonic filter 15Hz/30Hz selectable
• "Quick connect" High Current speaker terminals

Alpine introduces its award-winning line of Marine sound system products. Whether you want a simple sound upgrade for your runabout, a high-quality system for your cruiser or sportboat, or huge output for your ski/wakeboard boat, there is an Alpine Marine system just right for you. Constructed from UV resistant materials and finish, and corrosion resistant hardware, these bad boy amps are ready to rough the seas.

Accurate Dynamic Sound Reproduction
Alpine’s goal is to deliver the best sound quality possible. With the Marine PDX series, digital switch-mode amplification yields incredible sound quality. Advances in the PDX design include improved feedback circuitry to faithfully reproduce the input signal for improved dynamic range and higher fidelity. If you’re listening to your favorite rock song, your amp is ready to jump from loud to calm and back again with ease. Play it longer with the engine off!

FEATURES

Install

•  Connectors: Quick Disconnect Terminals
•  Terminal Layout: One-Sided
•  Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
•  Mounting Design: Easy Stacking

General

•  Amplifier Type: Class-D (Digital)
•  Channel Design: 1 Channel (Mono)
•  Thermal Control: Thermal Management Control
•  Power Supply: Resonant Mode Power Supply
•  Power Supply Design: DC-DC PWM Power Supply
•  Board Circuitry: STAR Circuit
•  Current Protection: Auto Over-Current Protection
•  Power Indicator: Top Mounted Blue LED Power/Status Indicator
•  RCA Output: Non-Fading Pre-Amp Output
•  Crossover: Adjustable Low-Pass
•  Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
•  Pre-Amp Stage: Discrete
•  Final Outputs: MOSFET
•  Board Design: 4-Layer Glass Epoxy PC Board
•  Gain Control: Adjustable

SPECIFICATIONS

CEA-2006 Power Ratings

•  CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ% THD+N), S/N: 80dBA, ref:1W into 4 I?) 600W x 1

RMS Power Ratings

•  Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz - 200Hz) 600W x 1
•  Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz - 200Hz) 600W x 1

Sound Tuning

•  Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass

Dimensions

•  Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
•  Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16''

General

•  Power Requirements: 14.4V DC (11V to 16V)
•  Input Sensitivity: 0.1V to 8.0V (For Rated Power)
•  Frequency Response: 20Hz - 200Hz (20Hz/-3dB)
•  Speaker Impedance: 4 or 2 I
•  Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 80 dBA